Custom Projection Screens
Screen Size: Nearly any width projection screen size is achievable. If the length or width of your projection screen is greater than 40’, however, the other dimension cannot be longer than 40’.
Dimensions: The height and width of your projection screen can be customized as needed. We can adjust its size to control the size of the projectable section of your screen, or we can adjust its size to control its outer dimensions.
Rigging Points: Rigging points (webbing tab with grommet) can be added anywhere along the border of your projection screen. Rigging points can be placed as close as 6” apart. Each additional rigging point adds $3.50 to the cost of your projection screen.
Black Out Backing: If you have a window or other light source that you’re concerned may cast light from behind your projection screen, we can add a second layer of white fabric to the back of it to create a black out screen. This will allow very minimal light to pass through from behind.
Custom Flat Panels Sails
Panel Size: Nearly any width flat panel sail is achievable. If the length or width of your flat panel sail is greater than 40’, however, the other dimension cannot be longer than 40’.
Shape: Nearly any geometric shape is achievable.
Color: We can produce your Stretch Shapes flat panel sail in any of the 16 colors shown here. We can also pantone match the color of your fabric to any pantone color through dye sublimation printing (there is an additional charge for dye sublimation printing).
Hemmed Border Width: We can change the width of the double thick borders on Stretch Shapes flat panel sails. Unless otherwise requested, flat panel sails with both height and width less than 12’ are manufactured with a 2” hemmed border. Unless otherwise requested, flat panel sails with at least one dimension greater than 12’ are manufactured with a 4” hemmed border. Hemmed borders can be customized to be as wide as 24”.
Rigging Points: Rigging points (webbing tab with grommet) can be added anywhere along the border of your flat panel sail. Rigging points can be placed as close as 6” apart. Each additional rigging point adds $3.50 to the cost of your flat panel sail.
Tension: The tension of your flat panel sail can be increased or decreased to accommodate your needs. This can be helpful in applications in which panels are being hung in a ceiling and minor drooping needs to be minimized (by increasing tension), or in applications in which rigging points can only handle minimal tension (and tension is thus decreased).
Custom Truss Covers
Length: Stretch Shapes truss covers can be manufactured in any length up to 300’.
Width: Stretch Shapes truss covers can be manufactured for any size or shape of truss.
Manufacture’s Specs: Provide us your truss manufacturer’s spec sheet and we will manufacture your truss cover exactly according to their specified dimensions.
End Caps: End caps can be added to any truss cover to close off one end. End caps cost $15 per cap.
Finished rigging openings: We can add finished rigging openings along the edges of your truss cover to allow O-clamps, C-clamps, or other mounts to pass through. Finished rigging openings cost $6 per opening.
Zippers: As an alternative to hook & loop, we can use white or silver zippers as a closure. Zipper closures cost $4.00 per foot.
Circle Truss: Circle truss configurations can be covered with either seamless truss covers that run the full circumference of your circle truss, or in sections that cover each 90° arc individually.
Color: We can produce your Stretch Shapes truss cover in any of the 16 colors shownhere. We can also pantone match the color of your fabric to any pantone color through dye sublimation printing (there is an additional charge for dye sublimation printing).
Dye sublimation printing: Any of our truss covers can have the design of your choice printed on them. You can provide your own art, or you can collaborate with our design team to create your art. Additional fees do apply for dye sublimation printing.
We fabricate large or small scale metal structures to function as framework for Stretch Shapes products. Our design team can take your idea from a three dimensional rendering to a finished metal fabricated structure with custom stretch fabric panels wrapping it.
Contact us with your custom project. We’re excited to make your idea a reality.